Product Search
4FE35 { 4" - 30 W - 91 dB - 8 Ohm }
Available Impedance: 4 Ohm8 Ohm16 Ohm
Share Datasheet on:
DOWNLOAD DATASHEET DOWNLOAD INFO PACK
Nominal Specifications
Nominal Diameter 100 mm (4 in)
Overall Diameter 129.85/100.5 mm (5.11/3.96 in)
Bolt Circle Diameter 115.26 mm (4.54 in)
Baffle Cutout Diameter 91.5 mm (3.60 in)
Depth 58.3 mm (2.30 in)
Flange and Gasket Thickness 7.2 mm (0.28 in)
Net Weight 570 g (1.3 lb)
Shipping Box
(Single Carton Box - 8 units)
225 x 225 x 150 mm
(8.9 x 8.9 x 5.9 in)
Shipping Weight (8 units) 5 kg (11.0 lb)


Technical Parameters
Nominal Impedance 8 Ohm
Minimum Impedance 7.2 Ohm
AES Power Handling (1) 30 W
Maximum Power Handling (2) 60 W
Sensitivity (1W/1m) 91 dB
Frequency Range 90÷20000 Hz
Voice Coil Diameter 19 mm (0.75 in)
Winding Material Al
Former Material Kapton
Winding Depth 6.8 mm (0.27 in)
Magnetic Gap Depth 4 mm (0.16 in)
Flux Density 1.1 T
Magnet Ferrite Ring
Basket Material Steel
Demodulation Copper Cap
Cone Surround (3) Half Roll
NET Air Volume filled by Loudspeaker 0.150 dm^3 (0.005 ft^3)
Spider Profile 1x constant height waves
Thiele and small parameters
Fs 100 Hz
Re 6.5 Ohm
Qes 1.04
Qms 4.2
Qts 0.83
Vas 2.4 dm^3 (0.07 ft^3)
Sd 51.9 cm^2 (8.04 in^2)
Xmax (4) 2.73 mm
Xdamage (5) 6.8 mm
Mms 3.9 g
Bl 3.9 N/A
Le 0.1 mH
Mmd 3.5 g
Cms 0.65 mm/N
Rms 0.6 kg/s
Eta Zero 0.23 %
EBP 96 Hz


PART NUMBER (P/N)
Faston Terminals - 8 Ohm Version 01004086



Notes:
Packaged and sold in multiples of 8 units
(1) 2 Hours Test According to AES 2-1984 Rev. 2003
(2) Maximum power is defined as 3dB greater than nominal power.
(3) NBR (Rubber)
(4) Xmax= [(winding depth - magnetic gap depth)/2] + (magnetic gap depth/3)
(5) Maximum excursion before permanent damage
Quick acoustic specs
Nominal Impedance 8 Ohm
Minimum Impedance 7.2 Ohm
AES Power Handling (1) 30 W
Sensitivity (1W/1m) 91 dB
Frequency Range 90÷20000 Hz
Flux Density 1.1 T
Magnet Ferrite Ring
Demodulation Copper Cap
Fs 100 Hz
Re 6.5 Ohm
Qes 1.04
Qms 4.2
Qts 0.83
Vas 2.4 dm^3 (0.07 ft^3)
Sd 51.9 cm^2 (8.04 in^2)
Xmax (2) 2.73 mm
Xdamage (3) 6.8 mm
Mms 3.9 g
Bl 3.9 N/A
Le 0.1 mH
Mmd 3.5 g
Cms 0.65 mm/N
Rms 0.6 kg/s
Eta Zero 0.23 %
EBP 96 Hz



Note:
Packaged and sold in multiples of 8 units
(1) 2 Hours Test According to AES 2-1984 Rev. 2003
(2) Xmax= [(winding depth - magnetic gap depth)/2] + (magnetic gap depth/3)
(3) Maximum excursion before permanent damage
Quick mechanical specs
Nominal Diameter 100 mm (4 in)
Overall Diameter 129.85/100.5 mm (5.11/3.96 in)
Bolt Circle Diameter 115.26 mm (4.54 in)
Baffle Cutout Diameter 91.5 mm (3.60 in)
Depth 58.3 mm (2.30 in)
Flange and Gasket Thickness 7.2 mm (0.28 in)
Net Weight 570 g (1.3 lb)
Shipping Box
(Single Carton Box - 8 units)
225 x 225 x 150 mm
(8.9 x 8.9 x 5.9 in)
Shipping Weight (8 units) 5 kg (11.0 lb)